成都空管自动化系统ADS-B处理模块设计与验证

基于ADS-B地面站及成都数据评估试验监测系统的建设需要,本文给出了成都自动化系统ADS-B处理功能的总体设计和系统架构,实现了自动化系统的ADS-B处理功能,并实现了ADS-B模块与自动化系统的隔离并行运行,确保ADS-B处理模块运行不影响自动化系统的保障能力。同时,通过对成都应急自动化系统的ADS-B处理能力和精度进行了飞行校验,结果证明系统各软件模块运行正常,处理结果正确,达到设计要求。     

多星多普勒频率变化率无源定位方法

针对多星时差频差定位系统时/频同步要求高、多星测向定位系统复杂等问题,提出一种多星多普勒频率变化率的无源定位体制,每颗卫星仅需单个接收天线和通道,且多星之间无需高精度时/频同步.针对定位观测量与辐射源位置的高度非线性,提出一种基于多普勒频率的多假设非线性最小二乘(M H-NLS)无源定位算法.理论推导了定位估计的克拉美-罗下限(CRLB),基于定位误差的几何分布(GDOP)分析了多星构型对定位误差的影响.计算机仿真分析表明,基于多普勒频率变化率的M H-NLS算法得到的定位误差能够达到CRLB.     

An experimental system for release simulation of internal stores in a supersonic wind tunnel

Aerodynamic parameters obtained from separation experiments of internal stores in a wind tunnel are significant in aircraft designs. Accurate wind tunnel tests can help to improve the release stability of the stores and in-flight safety of the aircrafts in supersonic environments.A simulative system for free drop experiments of internal stores based on a practical project is provided in this paper. The system contains a store release mechanism, a control system and an attitude measurement system. The release mechanism adopts a six-bar linkage driven by a cylinder, which ensures the release stability. The structure and initial aerodynamic parameters of the stores are also designed and adjusted. A high speed vision measurement system for high speed rolling targets is utilized to measure the pose parameters of the internal store models and an optimizing method for the coordinates of markers is presented based on a priori model. The experimental results show excellent repeatability of the system, and indicate that the position measurement precision is less than0.13 mm, and the attitude measurement precision for pitch and yaw angles is less than 0.126°, satisfying the requirements of practical wind tunnel tests. A separation experiment for the internal stores is also conducted in the FL-3 wind tunnel of China Aerodynamics Research Institute.     

高性能混凝土的外加剂优化研究(英文)

运用不同减水剂和早强剂配制高性能混凝土(High performance concrete,HPC),测定其工作性、标准养护强度和蒸汽养护强度,研究了HPC的外加剂选用原则。结果表明,掺加聚缩酸系高效减水剂有利于HPC获得高工作性和高强度。硫酸钠早强剂将导致工作性不好,强度降低。对于蒸汽养护的HPC制品,应该优先采用硫酸钠含量低的萘系高效减水剂。因此,HPC外加剂的选择应该考虑养护条件的差异。     

基于响应面近似技术的平流层飞艇协同设计优化

针对平流层飞艇多学科设计优化问题,引入协同优化算法,分析基于响应面近似模型的协同优化方法CO/RSA的执行步骤和特点,并介绍响应面近似模型的构建方法;建立平流层飞艇各学科模型,并对学科间耦合关系进行分析;运用建立的气动/推进、结构、能源三个耦合子系统的学科分析模型和系统优化模型,以平流层飞艇总质量最小为优化目标,综合考虑浮重、推阻和能源平衡,采用CO/RSA方法对平流层飞艇进行设计优化.结果表明:所建立的平流层飞艇的MDO模型是合理的,CO/RSA算法应用于飞艇总体设计优化是有效的,研究结果可为平流层飞艇方案论证和方案设计提供参考.     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

航空锂电池适航审定规章解读及符合性方法研究

锂离子电池作为动力电池有着优异的性能,在民航行业上有广阔的应用前景。但行业对其技术特征 和安全风险的认识还不充分,现行的规章条款缺乏足够的安全要求,国外局方针对锂离子电池颁发了专用条 件,但回顾相关事故可以发现,锂离子电池的验证和审查环节还不完善,相关条款更新修正的步伐也同锂电池 的发展现状和技术水平不相适应。以航空锂电池事故为例,分析航空锂离子电池作为动力电池的安全性风险, 从对现有规章条款和专用条件的解读出发,借鉴不同行业近年来积累的锂电池验证和使用经验,针对航空动力 锂电池的适航符合性方法提出一些改进方案,可作为现有锂电池适航符合性方法的有益补充,为自主建立健全 适航验证规范体系做出探索。     

配对进近模式分析及研究进展

配对进近模式是在近距平行跑道上运行的,旨在提高仪表气象条件下的进场效率的一种高效进近模 式,该模式的完整流程在国内鲜有阐述。本文重点分析配对进近程序在近距平行跑道上运行时各阶段的流程, 以及配对进近程序的实施对机型、设备以及人员的具体要求;结合目前国内近距平行跑道的运行情况,国际上 对配对进近模式的研究和应用现状,指出我国引进配对进近模式的迫切性以及该模式今后的研究和发展趋势。     

乘务类学生英语课程教学方法实证探析

通过问卷调查探析乘务类本科生对交际和非交际教学法及活动的认识和态度,旨在研究一种可以有效提高英语教学质量的方法.结果表明乘务类学生对交际教学活动和非交际教学活动都有偏好,因此对于此类学生更为有效的教学方法就是采取折中的综合性教学法.     

基于HTN的卫星应用任为分解方法

文章在深入分析卫星应用任务复杂性的基础上,研究了层次任务网络(HTN)方法对复杂卫星应用任务分解问题的适用性,并给出了相应的问题求解框架;深入研究了卫星应用任务需求要素预处理工作的主要内容和步骤,并在此基础上构建了卫星应用任务的域模型;最后给出了复杂任务及其分解方法的定义,采用基于HTN的方法对复杂卫星应用任务分解问题进行求解,同时给出了基于HTN的状态空间前向搜索算法.